A flush system is designed to effectively clean dairy farm alleys and holding areas. Automated and low maintenance, using it requires very little labor and keeps cows clean.
FREE STALL ALLEY CLEANER WITH CABLE
A free stall cleaner system with cable can be used to clean two, three or four alleys. The same drive unit controls all the scrapers. While one scraper is cleaning one alley, the other is backing up. The 16°, the V-Shape and the Straight scrapers are all available with the cable system. The main advantage of a cable system is the choice of several scraper configurations that allow cleaning of very long manure alleys.
FREE STALL ALEY CLEANER WITH CHAIN
7/8” (22 mm) and Pintle chains Systems
Field proven free stall cleaner systems using the 7/8″ (22 mm) or the pintle chains.
HYDRAULIC FREE STALL ALLEY CLEANER
The Hydraulic Free Stall Cleaner system is well suited to clean one alley, multiple alleys of different length or uneven number of alleys using a single power unit. It is the perfect option for small barns that do not use sand bedding and where the length of the alleys does not exceed 200 feet (61 m) or 250 feet (76 m) when the cross gutter is in the middle of the barn.
Scraper 16 Degree/ Straight
The new GEA ProManure E2191 tilting blade scraper replaces both the existing 16º and straight tilting blade scrapers.
SCRAPER- DEEP GROOVE SYSTEM
The deep Groove Scraper has been designed for alleys with a groove ranging from 4’’ (102 mm) to 10’’ (254 mm) deep. When using this scraper, the alley must be sloped towards the center. This allows the liquid to naturally drain out of the manure. The integrated toggling flat bar pushes solids contained into the groove towards the cross gutter.
SCRAPER- UNDER FLOOR CHANNEL
The raised design of the under floor channel draw bar allows liquid manure to flow into a channel installed underneath the manure alley. The channel can be made of concrete, circular or rectangular, or corrugated PVC pipe. During the cleaning stroke, a portion of the manure runs into the channel and is pushed towards the cross gutter by means of the integrated paddle. When using this type of scraper, the alley must be sloped towards the center allowing the liquid to naturally drip out of the manure.
The V-Shape Scraper is best suited to clean narrow alleys or when manure dries fast.
TUBE SCRAPER SYTEM
The opening in the draw bar allows manure and liquid to drain into the channel behind the paddle. This way, the paddle directs only the material from the previous cleaning stroke towards the cross gutter. A wheel positioned at the rear of the scraper pushes material into the tube to keep the groove free from any obstruction.